Paradyne 3165-A2, 3164-A2, 3160-A3, 3161-B3 manual From the Channel Config screen, select DTE

3. Operation

4.Line 1 displays the 24 channels for the network interface or the DTE Drop/Insert (DSX-1) interface, depending on which destination was chosen. This example assumes that the network is the destination. Line 2 displays

what is allocated to the DS0 channel shown in Line 1. Pressing the or key scrolls the channels onto the screen in groups of three. Select the channel by pressing the Function key under the desired number. Portn appears. The port is assigned to that channel. To deallocate a port, press the Function key under that port number. Pressing the Function key under channels assigned to other ports has no effect.

N1 N2

Next Prt1 Prt2

F1 F2 F3

Allocating DS0 Channels from the DTE Drop/Insert Interface to the Network Interface

By using the configuration options, you can allocate DS0 channels from the DTE Drop/Insert (DSX-1) interface to the network interface and specify which DS0 channels carry Robbed Bit Signaling (RBS) information for voice channels.

Procedure

To allocate DS0 channels from the DTE Drop/Insert (DSX-1) interface to the network interface:

1.From the top-level menu screen, select Cnfig.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Select Edit.

4.From the Edit screen, press the key until the Chan selection appears on the screen.

5.Select Chan.

Edit:

Port NET Chan

F1 F2 F3

6. From the Channel Config screen, select DTE.

Channel Config:

Dsply Clear DTE

F1 F2 F3

3-42 February 2001 3160-A2-GB21-90