Paradyne 3161-B3, 3165-A2, 3164-A2, 3160-A3 manual Individual Channel Assignment Method

3. Operation

4.The Start At screen displays the configuration option used to select the starting DS0 channel. If the destination selected is the network interface, then the network channels appear on the screen. If the destination selected is the DTE Drop/Insert (DSX-1) interface, then these channels appear on the screen.

The following screen shows an example for the network interface. Use the or key to scroll the desired channel onto the screen. Use the Function keys to select the starting channel. Only those DS0 channel numbers that provide enough bandwidth (based on the configured data rate) to be used as a starting channel number are displayed. Channel allocation for this port can only be cleared by selecting Clear.

Start At:Clear

Next Clear N1

F1 F2 F3

Individual Channel Assignment Method

The Assign By configuration option screen appears after you select a port.

Procedure

To assign by the individual channel method:

1. Press the key once to bring the Chan selection onto the screen.

Assign By:Block

Next Block ACAMI

F1 F2 F3

2. Press F3 (Chan).

Assign By:Chan
Block	ACAMI	Chan
F1	F2	F3

3. Press F1 (Next) to display the next configuration option (channel allocation).

3160-A2-GB21-90 February 2001 3-41