Paradyne 3164-A2, 3165-A2, 3160-A3 DTE Drop/Insert DSX-1 Interface LEDs Name Color Meaning, Pdv

3. Operation

NOTE:

The DTE Drop/Insert (DSX-1) interface is only available on 2-port and 4-port DSU/CSUs.

Table 3-3. DTE Drop/Insert (DSX-1) Interface LEDs

Name	Color	Meaning
SIG	Green	Monitors the signal being received from the DTE Drop/Insert
		(DSX-1) interface.
		ON: A recoverable signal is being received from the DTE
		Drop/Insert (DSX-1) interface.
		OFF: The signal cannot be recovered from the DTE Drop/Insert
		(DSX-1) interface (a Loss of Signal condition exists).
OOF	Yellow	Monitors Out Of Frame (OOF) conditions on the received DTE
		Drop/Insert (DSX-1) signal.
		ON: At least one OOF was detected on the signal during the
		sampling period.
		OFF: No OOFs were detected on the signal during the sampling
		period.
ALRM	Yellow	Indicates whether an alarm condition exists on the received DTE
		Drop/Insert (DSX-1) signal.
		ON: An alarm condition (LOS, LOF, EER, Yellow, AIS) exists on
		the received DTE Drop/Insert (DSX-1) signal. Use the Device
		Health and Status command to determine the alarm type.
		OFF: No alarm condition exists on the DTE Drop/Insert (DSX-1)
		interface signal.
PDV	Yellow	Monitors Pulse Density Violations (PDV) on the received DTE
		Drop/Insert (DSX-1) signal.
		ON: At least one PDV was detected (and corrected) on the
		received DTE Drop/Insert (DSX-1) signal during the sampling
		period.
		OFF: No PDVs were detected on the received DTE Drop/Insert
		(DSX-1) signal during the sampling period.
BPV	Yellow	Monitors Bipolar Violations (BPV) on the received DTE
		Drop/Insert (DSX-1) signal.
		ON: At least one BPV was detected (and corrected) on the
		received DTE Drop/Insert (DSX-1) signal during the sampling
		period.
		OFF: No BPVs were detected on the received DTE Drop/Insert
		(DSX-1) signal during the sampling period.

3160-A2-GB21-90 February 2001 3-7