Paradyne 3161-B3 Table C-2. Port Configuration Options 5, Far-end Disab Next Disab Maint Prev

C. Configuration Options

Table C-2. Port Configuration Options (5 of 5)

Near-end: Disab

Next Disab Maint Send Both Prev

Near-End Performance Statistics. Specifies whether the DSU/CSU maintains near-end performance statistics and sends performance report messages (PRMs) for a particular port.

Disab – Disables near-end performance statistics and does not send PRMs.

Maint – Maintains near-end performance statistics for this port.

Send – Sends PRMs over the port’s EDL every second. Each PRM contains the performance statistics for the previous 4 seconds.

Both – Maintains near-end performance statistics and sends PRMs over the port’s EDL.

NOTES:

–This configuration option is only available on 2-port and 4-port DSU/CSUs.

–This configuration option is not available if EDL is disabled.

–If the local DSU/CSU is configured to send near-end performance statistics, then the remote device must be configured to maintain far-end performance statistics.

Far-end: Disab

Next Disab Maint Prev

Far-End Performance Statistics. Specifies whether to monitor for far-end performance report messages (PRMs) and maintain far-end performance registers for a particular port.

Disab – Disables far-end performance statistics.

Maint – Monitors the port’s EDL for PRMs and maintains far-end performance statistics.

NOTES:

–This configuration option is only available on 2-port and 4-port DSU/CSUs.

–This configuration option is not available if EDL is disabled.

–If the local DSU/CSU is configured to maintain far-end performance statistics, then the remote device must be configured to send near-end performance statistics.

Mgmt Link: Disab

Next Enab Disab Prev

EDL Management Link. Specifies whether the EDL management link is enabled for a particular port. Selecting Enab allows SNMP or Telnet traffic to flow over the 4 kbps in-band data link provided by EDL.

Enab – Enables the port’s EDL management link.

Disab – Disables the port’s EDL management link.

NOTES:

–This configuration option is only available on 2-port and 4-port DSU/CSUs.

–This configuration option is not available if EDL is disabled or the FDL is enabled.

–If the local DSU/CSU’s EDL is enabled, then the remote device’s EDL must also be enabled.

3160-A2-GB21-90 February 2001 C-7