Paradyne 3165-A2, 3164-A2, 3160-A3, 3161-B3 manual Entering a Password to Gain Access

3. Operation

5.Use the and keys to position the cursor under the desired character.

You must enter a character before the moves the cursor to the next space to the right.

Passwd: xxxxxxxx

Up Down Save

F1 F2 F3

6.Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and down through the valid characters/numbers for the password. Valid password characters are 0-9,a-z,A-Z, #, -, .,and /. Press F3 (Save) to save the password.

Passwd: xxxxxxxx

Up Down Save

F1 F2 F3

Entering a Password to Gain Access

You are prompted to enter a password (up to 8 characters) when you are accessing a port whose Password configuration option is set (refer to the previous section, Setting a Password on page 3-49).

Valid password characters are 0-9,a-z,A-Z, #, -, .,and /. The existing password is not shown on the screen. An underscore in the first position shows where to enter the first character. If the password is set to all null characters (default value), press F3 (Done) when the password screen first appears.

The following screen appears when you access a DSU/CSU that has a password enabled.

Passwd:_

Up Down Done

F1 F2 F3

3-50 February 2001 3160-A2-GB21-90