Paradyne 3160-A3, 3165-A2 Displaying DS0 Channel Assignments, Display Channel Symbols Meaning

3. Operation

NOTE:

The following procedures are examples only. Screen displays may vary depending on the model and configuration of the DSU/CSU.

Displaying DS0 Channel Assignments

Use the Display command (in the Channel Configuration branch) to view how the DS0 channels are currently allocated.

Line 1 of the display shows the 24 channels of the selected interface. Pressing the

or key scrolls the channels onto the screen in groups of three. Line 2 displays what is allocated to the DS0 channel listed in Line 1. Symbols used in the display are shown in Table 3-5, Display Channel Symbols.

Table 3-5. Display Channel Symbols

Symbol Meaning

–The DS0 channel is not allocated.

Prtn	The DS0 channel is allocated to Port n, where n is 1, 2, 3, or 4.
Nn	The DS0 channel is allocated to the network interface DS0 channel n,
	where n can be any number from 1 through 24.
Dn	The DS0 channel is allocated to the DTE Drop/Insert (DSX-1) interface
	DS0 channel n, where n can be any number from 1 through 24.

Procedure

To display the DS0 channel allocation:

1.From the top-level menu screen, select Cnfig.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Select Edit.

4.From the Edit screen, press the key until the Chan selection appears on the screen.

5.Select Chan.

Edit:

Port NET Chan

F1 F2 F3

3-36 February 2001 3160-A2-GB21-90