Paradyne 3160-A3, 3165-A2, 3164-A2, 3161-B3 manual Initiating an Asynchronous Terminal Session

H. Asynchronous Terminal Operation

Initiating an Asynchronous Terminal Session

Once the appropriate configuration option changes have been made and access is established, the Main Menu screen appears (unless a password is required).

Figure H-1, Main Menu Screen, shows the Main Menu screen for a standalone

DSU/CSU.

The carrier-mounted DSU/CSU shows the 3000 Series carrier slot number under the Customer ID. The slot number field (e.g., Slot: 1) is changed to access specific DSU/CSUs in the carrier. For Telnet or SNMP access to the carrier, specify the IP address of the applicable communication port (see Appendix F, IP Network Addressing Scenarios).

NOTE:

By convention throughout this appendix, examples of screens are shown as they appear with the standalone DSU/CSU.

If a password is required, the Login screen displays the prompt for password input. (Refer to Entering a Password to Gain Access on page H-14.)

To move between the Screen area and the Screen Function Keys area (Figure H-1, Main Menu Screen), press Ctrl-a (Control key and a).

From the Screen area, you may select the Status, Test, Configuration, or

Control branches.

H-2 February 2001 3160-A2-GB21-90