Paradyne 8779, 8747, 8777, Hotwire M/SDSL and HDSL2 Termination Units Product-Related Documents

About This Guide

Section	Description
Chapter 9	Transferring Code and Configurations Using TFTP. Shows
	how to upload and download firmware and configuration
	files.
Appendix A	Configuration Options. Contains all configuration options,
	default settings, and possible settings.
Appendix B	Standards Compliance for SNMP Traps. Contains SNMP
	trap compliance information.
Appendix C	Connector Pin Assignments. Lists the pin assignments for
	the front panel DTE connector.
Appendix D	Technical Specifications. Contains physical and regulatory
	specifications, network and port interfaces, power
	consumption values, and accessory part numbers.
Appendix E	Cross-Connection Worksheets. Contains worksheets to help
	plan and configure the cross-connection of DTE and DSL
	ports.
Glossary	Defines acronyms and terms used in this document.
Index	Lists key terms, acronyms, concepts, and sections in
	alphabetical order.

Product-Related Documents

Document Number	Document Title
7970-A2-GB20	Hotwire M/SDSL, M/HDSL, and HDSL2 Standalone
	Termination Units, Models 7944, 7945, 7974, 7975,
	7976, 7984, 7985, and 7986, User’s Guide
8000-A2-GB22	Hotwire Management Communications Controller
	(MCC) Card, IP Conservative, User’s Guide
8000-A2-GB29	Hotwire Management Communications Controller
	(MCC) Card User’s Guide
8610-A2-GN10	Hotwire 8610	DSLAM Installation Instructions
8810-A2-GN11	Hotwire 8810	DSLAM Installation Instructions
8820-A2-GN20	Hotwire 8820	GranDSLAM Installation Guide

Contact your sales or service representative to order additional product documentation.

Paradyne documents are also available on the World Wide Web at

www.paradyne.com. Select Library → Technical Manuals.

viii April 2000 8700-A2-GB20-00