Paradyne 8779 Network Interface Options Menu, Table A-1. Network Interface Options 1, Port Status

Configuration Options

Network Interface Options Menu

For Network Interface Options, refer to Table A-1. To access the Network

Interface Options screen, follow this menu selection sequence:

Main Menu → Configuration → Current Configuration → Network

main/config/network
Slot: 18			Model: 87xx
Port 2
	NETWORK INTERFACE OPTIONS
Port Status		Enable
Margin Threshold:		0db
Excessive Error Rate Threshold: 1E–6
AutoRate:		Disable
DSL Line Rate:		1552	kbps
EIA-530 Payload Rate		1536	kbps
Transmit Attenuation		0dB
Peer IP Address:		111.255.255.000 Clear
DS0 Cross Connect Line Framing: ESF
Circuit Identifier:				Clear

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Table A-1. Network Interface Options (1 of 3)

Port Status

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether the port can be configured and used.

Enable – The port can be configured and used.

Disable – The port cannot be configured or used.

Margin Threshold

Possible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db, 7db, 8db, 9db, 10db

Default Setting: 0db

Determines the level, expressed in decibels, at which a signal-to-noise margin condition is recognized.

–5dbto 10db – Sets the margin threshold to this value.

A-2 April 2000 8700-A2-GB20-00