Paradyne 8747, 8777, 8779 manual Self-Test Results Messages, Call your service

Monitoring and Troubleshooting

Self-Test Results Messages

The results of the last power-on or reset self-test appear in the middle column of the System and Test Status screen.

Table 7-2. Self-Test Results Messages (1 of 2)

Message	What Message Indicates	What To Do
CPU Fail	The Central Processing Unit failed	1. Reset the unit and try again.
	internal testing.	2. Call your service
CPU CPLD	The Complex Programmable Logic	representative for assistance.
Fail	Device serving the Central
	Processing Unit failed.
Data Path	The port shown failed to loop data on
Fail, Pt n	the full data path test.
DeviceFailed	One or more of the unit’s integrated
	circuits has failed device-level
	testing.
DSL	The DSL framer for Ports 1–4
Framer x Fail	(Framer A) or 5–8 (Framer B) failed.
DSL xcvr	The DSL transceiver failed on Port n.
Fail, Pt n
DSX-1	The unit failed to internally loop data
Failed, Pt n	on the DSX-1 Port n.
DTE	The DTE framer for Ports 1–4
Framer x Fail	(Framer A) or 5–8 (Framer B) failed.
DTE LIU x	The DTE Line Interface Unit for
Fail	Ports 1–2 (LIU A), 3–4 (LIU B), 5–6
	(LIU C), or 7–8 (LIU D) failed.
EEPROM	The unit failed Electrically Erasable
Fail	Programmable Read-Only Memory
	verification.
Failure	An internal failure occurred.	Record the failure code and
xxxxxxxx	(xxxxxxxx represents an 8-digit	contact your service
	hexadecimal failure code for use by	representative.
	service personnel.)
FPGA Failed	The Field Programmable Gate Array	1. Reset the unit and try again.
	serving all ports failed.	2. Call your service
G.703	The unit failed to loop data on the	representative for assistance.
Failed, Pt 1	G.703 on Port n.
Memory	The unit failed memory data
Test n Fail	verification (Test 1) or memory
	address verification (Test 2).

Passed

No errors were detected.

N/A

7-6 April 2000 8700-A2-GB20-00