Paradyne 8779, 8747, 8777, Hotwire M/SDSL and HDSL2 Termination Units manual Applying the Download

Transferring Code and Configurations Using TFTP

"Procedure

To download firmware:

1.Position the cursor in the Image File Name field. Type the name of the file to be downloaded.

The file name may be a regular path name expression of directory names separated by a forward slash (/) ending with the file name. The total path name length can be up to 128 characters.

2.Position the cursor in the TFTP Server IP Address field. Enter the TFTP server IP address.

The first three digits of the IP address cannot be 000 or greater than 223.

3.Position the cursor in the Immediately Apply Download field. If you would like the download to be effective immediately, select Yes.

4.Position the cursor at the Start Transfer field. Use the spacebar to select Yes. Press Enter.

When the data transfer is complete, the Transfer Status field changes to

Completed successfully.

Applying the Download

If you specified No (the default) in the Immediately Apply Download field in Step 3 above, you must now apply the download.

"Procedure

To apply the downloaded firmware:

1.Press the Escape key to return to the Control menu. Select Apply Download.

2.On the Apply Download screen, type Yes to reset the card and activate the code.

9-2 April 2000 8700-A2-GB20-00