Paradyne 8777, 8747 About This Guide, Document Purpose and Intended Audience, Document Summary

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate Hotwire Models 8747, 8777, and 8779 Multirate Symmetric Digital Subscriber Line (M/SDSL) and High-bit-rate DSL second generation (HDSL2) Termination Units, and is intended for installers and operators.

Document Summary

Section	Description
Chapter 1	About the Hotwire 8747, 8777, and 8779 Termination Units.
	Describes the Hotwire Termination Units’ features and
	capabilities.
Chapter 2	Using the Asynchronous Terminal Interface. Provides
	instructions for accessing the user interface and navigating
	the screens.
Chapter 3	Initial Startup and Configuration. Provides instructions for
	configuring the unit.
Chapter 4	Cross-Connecting Ports. Provides instructions for
	cross-connecting the time slots of the DSL and DTE ports.
Chapter 5	IP Addressing. Provides IP addressing requirements and
	examples.
Chapter 6	Security. Presents procedures for creating a login, setting
	the effective access levels, and controlling SNMP access.
Chapter 7	Monitoring and Troubleshooting. Describes using the LEDs,
	status messages, and network statistics to monitor the unit
	and diagnose problems.
Chapter 8	Testing. Provides instructions for running network, DSX-1,
	and G.703 tests.

8700-A2-GB20-00 April 2000 vii