Paradyne 8779, 8747, 8777 manual Set Cross-Connect Mode, CROSS-CONNECT Mode

Configuration Options

Set Cross-Connect Mode

For Cross-Connect Mode configuration options, refer to Table A-9. To access the Set Cross-Connect Mode screen, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration

From → Cross-Connect → Set Cross-Connect Mode

main/config/xconnect_mode
Slot: 18			Model: 87xx
	CROSS-CONNECT MODE
DSX-1 G.703 Port		MODE	DSL Port
1		DS1 Bypass	1
2		DS1 Bypass	2
3		DS1 Bypass	3
4		DS1 Bypass	4
5		DS1 Bypass	5
6		DS1 Bypass	6
7		DS1 Bypass	7
8		DS1 Bypass	8

Assign_DS0s

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save	Clear_All

If any port Mode is DS0 Cross-connect, selecting Assign_DS0s causes the

Assign Time Slots screen to be displayed.

The Clear_All command changes the Mode of all enabled ports to DS0

Cross-Connect. All DSL port numbers and time slot assignments are cleared.

For information about the cross-connectionsystem, see Chapter 4,

Cross-Connecting Ports.

A-18 April 2000 8700-A2-GB20-00