Paradyne 8779 DSX-1 Interface Options, Main Menu → Configuration → Load Configuration From → DSX

Configuration Options

DSX-1 Interface Options

For DSX-1 Interface Options (Models 8747 and 8777), refer to Table A-4. To access the DSX-1 Interface Options screen, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration From → DSX-

main/config/DSX-1
Slot: 18	Model: 87xx
Port 2
DSX-1 INTERFACE OPTIONS
Port Status:	Enable
Line Coding:	B8BS
Line Framing:	ESF
Line Equalization:	0 -133
Excessive Error Rate Threshold:	1E-4
Primary Clock Source:	DSX-1

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Table A-4. DSX-1 Interface Options (1 of 2)

Port Status

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether the port can be configured and used.

Enable – The port can be configured and used.

Disable – The port cannot be configured or used. Configuration fields for the port are inaccessible, no alarms or traps associated with the port are generated, and the LED associated with the port is OFF.

Cross-connections are not cleared when a port is disabled.

Line Coding Format

Possible Settings: AMI, B8ZS

Default Setting: B8ZS

Specifies the line coding format to be used by the DSX-1 interface.

AMI – Indicates the line coding format used by the DSX-1 interface is Alternate Mark

Inversion (AMI).

B8ZS – Indicates the line coding format used by the DSX-1 interface is B8ZS.

A-6 April 2000 8700-A2-GB20-00