Paradyne Hotwire M/SDSL and HDSL2 Termination Units, 8747 Viewing LED Status, System, DSL Loop

Monitoring and Troubleshooting

Viewing LED Status

The unit LEDs can be viewed on the Display LEDs Status screen, available locally and remotely.

The LEDs are organized into three groups:

HSystem LEDs display the status of the unit

HDSX-1or G.703 LEDs provide the status of the DTE interface

HDSL Loop LEDs display the activity on the DSL network

To view the Display LEDs status screen, follow this menu selection sequence:

Main Menu → Status →	Display LEDs
main/status/leds
Slot: 18		Model: 87xx
	DISPLAY LEDs
SYSTEM	DSX-1G.703 Port	DSL LOOP

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Alarm Off	P1:Link Up	P1:Link Up
Test Off	P2:Link Up	P2:Link Up
	P3:Link Up	P3:Disabledp
	P4:Link Up	P4:Link Up
	P5:Link Up	P5:Link Up
	P6:Link Up	P6:Link Up
	P7:Link Up	P7:Link Up
	P8:Link Up	P8:Link Up

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

ESC for previous menu MainMenu Exit

The LED status display screen is updated every 5 seconds.

Table 7-5shows the meaning of the possible values for each LED represented.

8700-A2-GB20-00 April 2000 7-17