Paradyne 8779, 8747, 8777 manual Snmp Trap Description Possible Cause

Standards Compliance for SNMP Traps

SNMP Trap	Description	Possible Cause
enterpriseFallback	After a loss of signal, the	Variable line conditions.
AutoRate(13)	unit resynchronized to a
	lower rate than the last
	known rate.
	Variable bindings:
	H ifIndex (RFC 1573)
	H ifAdminStatus
	(RFC 1573)
	H ifOperStatus (RFC 1573)
	H ifType (RFC 1573)
enterprisePrimaryClockFail	The LTU has recovered and
Clear(101)	is using its primary clock
	source.
	No variable bindings.
enterpriseSecondaryClock	The LTU has recovered and
FailClear(104)	is using its secondary clock
	source.
	No variable bindings.
enterpriseTestStop(105)	All tests have been halted.	All tests on an interface
	Variable bindings:	have been stopped by
		timeout or an Abort All Tests
	H ifIndex (RFC 1573)	command.
	H ifAdminStatus
	(RFC 1573)
	H ifOperStatus (RFC 1573)
	H ifType (RFC 1573)
	H ifTestType (RFC 1573)
enterpriseFallback	After an AutoRate fallback
AutoRateClear(113)	condition, the unit
	resynchronized to the last
	known rate.
	Variable bindings:
	H ifIndex (RFC 1573)
	H ifAdminStatus
	(RFC 1573)
	H ifOperStatus (RFC 1573)
	H ifType (RFC 1573)

B-6 April 2000 8700-A2-GB20-00