Paradyne 8777, 8747, 8779 manual Configuration Edit/Display, Select To Access To Configure

Initial Startup and Configuration

Configuration Edit/Display

The Configuration Edit/Display screen appears when the current, customer, or default configuration is loaded and allows groups of configuration options to be displayed. To access the Configuration Edit/Display screen, follow this menu selection sequence:

Main Menu → Configuration →	Current Configuration
– or –
Main Menu → Configuration →	Default Factory
main/config/edit
Slot: 4	Model: 87xx

CONFIGURATION EDIT/DISPLAY

Network

DSX-1 G.703

Copy Ports

System Options

System Clock

Cross-Connect

Management and Communication

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Select . . .	To Access the . . .	To Configure the . . .
Network	Network Interface Options, Table A-1	DSL interface ports.
DSX-1	DSX-1 Interface Options, Table A-4	DSX-1 interface ports
		(Models 8747 and 8777).
G.703	G.703 Interface Options, Table A-5	G.703 interface ports
		(Model 8779).
Copy Ports	Copy Ports Options, Table A-6	DSL network and DTE
		interface ports by copying
		options from port to port.
System	System Options, Table A-7	General system options of
Options		the unit.
System Clock	System Clock Options, Table A-8	LTU system clock options.
Cross-Connect	Cross-Connect Mode Options, Table A-9	DS1 and DS0
	Assign Time Slots Options, Table A-10	cross-connect ports.
Management	Telnet Session Options, Table A-11	Management support of the
and	General SNMP Management Options,	unit through SNMP and
Communication		Telnet.
	Table A-12
	SNMP NMS Security Options,
	Table A-13
	SNMP Traps Options, Table A-14

8700-A2-GB20-00 April 2000 3-5