Paradyne 8747 Interface Options, Main Menu → Configuration → Load Configuration From → G, Framing

Configuration Options

G.703 Interface Options

For G.703 Interface Options (Model 8779), refer to Table A-5. To access the

G.703 Interface Options screen, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration From → G.

main/config/G.703
Slot: 4	Model: 87xx

Port: 2

G.703 INTERFACE OPTIONS

Port Status:	Enable
Framing:	Framed
Line Coding:	HDB3
Line Framing:	noCRC4
Time Slot 16:	Data
Primary Clock Source:	G703

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Table A-5. G.703 Interface Options (1 of 2)

Port Status

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether the port can be configured and used.

Enable – The port can be configured and used.

Disable – The port cannot be configured or used. Configuration fields for the port are inaccessible, no alarms or traps associated with the port are generated, and the LED associated with the port is OFF.

Cross-connections are not cleared when a port is disabled.

Framing

Possible Settings: Framed, Unframed

Default Setting: Framed

Specifies whether G.704 framing is used for the G.703 interface.

Framed – The unit conforms to G.704 framing, using time slot 0.

Unframed – G.704 framing is disabled, and the port is forced to DS1 Bypass mode.

A-8 April 2000 8700-A2-GB20-00