Paradyne 8779, 8747, 8777, Hotwire M/SDSL and HDSL2 Termination Units manual This Field Contains

Monitoring and Troubleshooting

HBES (Bursty Errored Seconds): Contains the number of bursty errored seconds for the current interval. A bursty errored second is any second with more than one but less than 805 CRC errors (CRC Mode) or more than one but less than 16 FAS errors (non-CRC mode).

HCSS (Controlled Slip Seconds): Seconds during which one or more controlled slips (as defined in TR 54016) occurred.

HLOF (Loss of Frame Seconds): Contains the number of seconds that contain one or more LOF events.

HStatus: Contains the contents of the status events register. The status events register maintains a history of specific events that have occurred during an interval. Values include:

—Y: Remote alarm indication signal received at the G.703 interface

—L: Loss of signal detected at the G.703 interface

—E: Excessive error rate threshold exceeded

—F: Frame synchronization bit error detected

—V: Line code violation detected

—None: No significant events have occurred

Use the virtual function keys to page through the intervals and clear statistics.

This Field . . .	Contains . . .
Current Interval	The number of seconds which have elapsed in the current
Timer	15-minute interval. Maximum value is 900 seconds (15 minutes).
	This counter is reset every 15 minutes.
Error Events	A running total of CRC errors. Range 0–65535. This counter is
Counter	reset when the statistics are cleared.
Current Int	Performance data for the current 15-minute interval.
Interval xx	Historical performance data for up to 96 15-minute intervals
	(24 hours).
Worst Interval	The number of the interval with the worst (highest) performance
	data statistics. If two or more intervals are equal, the oldest
	interval is displayed.

Tot

A running total of the performance statistics.

7-16 April 2000 8700-A2-GB20-00