Paradyne Hotwire M/SDSL and HDSL2 Termination Units, 8747 Screen Work Areas, Input, Fields, Keys

Using the Asynchronous Terminal Interface

Screen Work Areas

There are two user work areas:

HScreen area – This is the area above the dotted line that provides the menu path, menus, and input fields.

The menu path appears as the first line on the screen. In this manual, the menu path is presented as a menu selection sequence with the names of the screens:

Main Menu → Configuration → Load Configuration From → Network

Interface Options

HScreen function key area – This is the area below the dotted line that lists function keys specific to the screen, field value choices, and system messages.

Menu Path

main/config/network
Slot:	4	Model: 87xx
Port:	2

	NETWORK INTERFACE OPTIONS
	Port Status	Enable
	Margin Threshold:	–3db
	Excessive Error Rate Threshold: 1E–5
	AutoRate:	Disable
Input	DSL Line Rate:	1552	kbps
	EIA-530 Payload Rate	1536	kbps
Fields
	Transmit Attenuation	0dB
	Peer IP Address:	111.255.255.000 Clear

	Circuit Identifier:			Clear
	––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Screen	Ctrl-a to access these functions, ESC for previous menu		MainMenu Exit
Function	Save
Keys	Select: 1E–4, 1E–5, 1E–6, 1E–7, 1E–8, 1E–9		LOS at Net, Pt 1
Field Value		System
Choices		Messages

8700-A2-GB20-00 April 2000 2-5