Paradyne Hotwire M/SDSL and HDSL2 Termination Units, 8747, 8777, 8779 manual Ending an ATI Session

Using the Asynchronous Terminal Interface

Ending an ATI Session

Use the Exit function key from any screen to terminate the session.

"Procedure

To end a session with the asynchronous terminal interface:

1.Press Ctrl-a to go to the screen function key area below the dotted line.

2.Save changes if required. A confirmation message appears if you have made but not saved changes to your configuration.

3.Tab to Exit (or type e or E) and press Enter. If you have accessed the unit through the management card, the Hotwire Chassis Card Selection menu appears.

Exiting From the DSLAM Session

You can manually log out of the system or, after five minutes of inactivity, the system will automatically log you out.

"Procedure

To manually exit from the Hotwire DSLAM system:

1.Return to the Hotwire Chassis Main Menu by selecting Exit from either the Hotwire – MCC menu or the Hotwire – DSL menu.

The Hotwire Card Selection menu appears.

2.Press Ctrl-z.

The Hotwire Chassis Main Menu appears.

3.From the Hotwire Chassis Main Menu, select Logout.

The system exits from the current login session on the Hotwire DSLAM.

8700-A2-GB20-00 April 2000 2-9