Paradyne 8779, 8747, 8777 manual Switching Between Screen Work Areas, Example

Using the Asynchronous Terminal Interface

Switching Between Screen Work Areas

Select Ctrl-a to switch between the two screen work areas to perform all screen functions.

"Procedure

To access the screen function area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the screen function key area below the dotted line.

2.Select either the function’s designated (underlined) character or press the Tab key until you reach the desired function key.

Example:

To save the current options, type s or S ( Save).

3.Press Enter. The function is performed.

4.To return to the screen area above the dotted line, press Ctrl-a again

main/config/network
Slot: 4		Model: 87xx
Port: 2
	NETWORK INTERFACE OPTIONS
Margin Threshold:		–3db
Excessive Error Rate Threshold: 1E–5
AutoRate:		Disable
DSL Line Rate:		1552
Circuit Identifier:			Clear

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

2-8 April 2000 8700-A2-GB20-00