Paradyne 8779, 8747, 8777, Hotwire M/SDSL and HDSL2 Termination Units manual ATI Access Levels

Security

ATI Access Levels

The Hotwire Termination Unit has two access levels: Administrator and Operator. The access level determines what functions are accessible, as shown in

Table 6-1.

Table 6-1. Access Levels

ATI Access to Menu Functions	Administrator	Operator
Status	Read-Only	Read-Only
Test	Full Access	No Access
Configuration	Full Access	Read-Only
Control	Full Access	No Access

Access levels can be applied to Login IDs and Telnet sessions. When access is through Telnet and a login is required for Telnet, the effective access level is the more restrictive of the Telnet session access level or the login access level. (See Table A-11,Telnet Session Options.)

When an access level of Operator is applied to Telnet sessions, a Login ID with Administrator authority is effectively reduced to Operator. It is no longer possible to change configuration options, and full access can be restored only by reloading factory defaults. (See Restoring Access to the User Interface in Chapter 3, Initial Startup and Configuration.)

6-2 April 2000 8700-A2-GB20-00