
Configuration Options
Table A-14. SNMP Traps Options (2 of 2)
Enterprise Specific Traps
Possible Settings: Enable, Disable
Default Setting: Disable
Determines if SNMP traps are generated for
Enable – SNMP traps are generated for enterpriseSpecific events.
NOTE: Refer to Enterprise Specific Traps in Appendix B, Standards Compliance for SNMP Traps.
Disable – No
Link Traps
Possible Settings: Disable, Up, Down, Both
Default Setting: Both
Determines if SNMP traps are generated for link up and link down for one of the communication interfaces.
Disable – No linkUp or linkDown SNMP traps are generated.
Up – A linkUp trap is generated when the unit recognizes that one of the communication interfaces is operational.
Down – A linkDown trap is generated when the unit recognizes a failure in one of the communication interfaces.
Both – Sends trap messages for detection of both linkUp and linkDown.
NOTE: Refer to linkUp and linkDown in Appendix B, Standards Compliance for SNMP Traps.
Link Traps Interfaces
Possible Settings: Network,
Default Setting: All
Determines if the SNMP linkUp, SNMP linkDown, and
Network – SNMP trap messages are generated for the DSL network interface.
All – SNMP trap messages are generated for the DSL network interface, COM port, and
April 2000 |