Paradyne 8777, 8747, 8779 manual Testing, Accessing the Test Menu, Main Menu →

Testing

8

Accessing the Test Menu

From the Test menu, you can run network tests, data port tests, and a front panel lamp test.

To access the Test menu, follow this menu selection sequence:

Main Menu →

main/test
Slot: 18	Model: 87xx

TEST

Network & DSX-1 G.703 Tests

Device Tests

Abort All Tests

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Select . . .

To . . .

Network & DSX-1 Tests	Start and stop tests on the DSX-1, G.703, or network
Network & G.703 Tests	interface.
Device Tests	Start and stop the Lamp Test.
Abort All Tests	To abort current tests excluding network-initiated
	loopback tests. An aborted test may continue to run for
	a few seconds as the abort command is sent to the
	remote end and processed.

8700-A2-GB20-00 April 2000 8-1