Paradyne 8777, 8747, 8779 manual Enterprise-Specific Traps, Snmp Trap Description Possible Cause

Standards Compliance for SNMP Traps

Enterprise-Specific Traps

The enterpriseSpecific trap indicates that an enterprise-specific event has occurred. The Specific-trap field identifies the particular trap that occurred. The following table lists the enterprise-specific traps supported by the unit:

SNMP Trap	Description	Possible Cause
enterprisePrimaryClockFail	The unit has lost its primary	Hardware failure in the unit
(1)	clock source.	or the clock source.
	No variable bindings.
enterpriseSelfTestFail(2)	A hardware failure of the	Failure of one or more of the
	unit is detected during the	unit’s hardware components.
	unit’s self-test. The trap is
	generated after the unit
	completes initialization.
	Variable bindings:
	H devSelfTestResults
enterpriseDeviceFail(3)	An internal device failure.	Operating software has
	No variable bindings.	detected an internal device
		failure.
enterpriseSecondaryClock	The unit has lost its	Hardware failure in the unit
Fail(4)	secondary clock source.	or the clock source.
	No variable bindings.

enterpriseTestStart(5)

A test is running.

Variable bindings:

HdevSelfTestResults

HifIndex (RFC 1573)

HifAdminStatus (RFC 1573)

HifOperStatus (RFC 1573)

HifType (RFC 1573)

HifTestType (RFC 1573)

At least one test has been started on an interface.

enterpriseConfigChange(6)

The configuration changed via the user interface. The trap is sent after

60 seconds have elapsed without another change. This suppresses the sending of numerous traps when multiple changes are made in a short period of time, as is typically the case when changing configuration options.

No variable bindings.

Configuration has been changed via the ATI.

8700-A2-GB20-00 April 2000 B-5