Parker Hannifin G2 manual Functions, Acceleration s-shaped, deceleration constant acceleration

5Functions

The feed velocity during a move becomes the commanded velocity multiplied by the velocity override value. If the velocity override value is changed during a move, the moving part is accelerated at the same acceleration profile and acceleration as the normal acceleration time when the velocity override value is increased. In the same way, the moving part is decelerated at the same deceleration profile and deceleration as the normal deceleration time when the velocity override value is decreased.

Waiting for trigger				Waiting for trigger
			500ms/div				500ms/div
			NORM:2kS/s				NORM:2kS/s
150%	150%
100%		100%
0%			0%

[Acceleration: s-shaped, deceleration: constant acceleration]

[Related parameters]

#3 Selecting the type of cam profile move

#4 Selecting the acceleration type

#5 Selecting the deceleration type

#7 Acceleration time during a trapezoidal move

#8 Deceleration time during a trapezoidal move

5-16