Parker Hannifin G2 manual 9.7 I/O Monitor Display, P L C, I / O, S E L, N / P

9.7I/O Monitor Display

The I/O signal status of the blocks with numbers input from the keypad for the selected I/O type is displayed periodically. It is not necessary to press the Return key in order to set a number.

There are three types of I/O that can be selected: “Ctl I,” “Ctl 0,” and “Drv I.” You can switch among them by pressing the f2/f6 SEL key.

In the previous example of display 2), block number “1” is entered to display the signal status of Ctl DI block 1. If the f2/f6 SEL key is pressed here, the display changes similarly to display 3) and switches to the Ctl DO display.

1) Initial display

Ctl I00:xxxxxxxx -I/O-SEL N/P

Cursor

2) Displaying Ctl DI

Ctl I01:xxxxxxxx -I/O- SEL N/P

3) Displaying Ctl DO

Ctl 000:xxxxxxxx

-I/O- SEL N/P

f2	SEL:	Switches I/O signal type (positive direction).
f3	N:	To the next display
f6	SEL:	Switches I/O signal type (opposite direction).
f7	P:	To the previous display

0 to 9: Each character is entered.

←and → key: Moves the cursor in the I/O signal block number setting area to the left or right.

↑ and ↓ key:	Increases/decreases the numeric value of the
	digit indicated by the cursor.

Ctl I

Block number 0: DI07 to DI00 1: DI15 to DI08

Ctl 0

Block number 0: DO07 to DO00 1: DO15 to DO08

Drv I (Driver input signal status) Block number 0: DI07 to DI00 1: DI15 to DI08

									Signal status display area
	I/O signal block								O: On
							＋7	＋0	ｘ: Off
	number setting area
									The signal numbers on a block
		P L C	I	0 0	:	x x x x x x o x			increase from the right end
									toward the left: +0, +1, ..... +7.
I/O signal type		- I / O -					S E L	N / P
									Function key content
display area
									display area
Driver input signal status
DI00:	(Reserved)							DI08: (Reserved)
DI01:	(Reserved)							DI09: (Reserved)
DI02:	(Reserved)							DI10: (Reserved)
DI03:	(Reserved)							DI11: (Reserved)
DI04:	Homing detection							DI12: (Reserved)
DI05:	(+) direction over-travel detection							DI13: (Reserved)
DI06:	(-) direction over-travel detection							DI14: (Reserved)
DI07:	(Reserved)							DI15: (Reserved)

9

9-7