Parker Hannifin G2 manual Parameter Monitor Display, Mon- Data N/P, #050 Mon- Cmnt N/P

9.5Parameter Monitor Display

The current values of parameters/monitors with the numbers input from the keypad are displayed periodically. It is not necessary to press the Return in order to set a number.

In the previous example of display 2), parameter number “50” is entered to display the prompt character string of that parameter/monitor. When the f2 DATA key is pressed here, display 3) appears and displays the current value of the parameter/monitor.

If a nonexistent number is entered, both the data and comment displays show the comment in display 4).

1) Initial display

#001:+HOT_ErrEn -Mon- DATA N/P

Cursor

2) Displaying comment

#050: Position bandwidth

-Mon- DATA N/P

3) Displaying data

f2	DATA:	Switches display; to the data display
CMNT:		To the comment (prompt) display
f3	N:	To the next display
f7	P:	To the previous display
0 to 9:		Each character is entered.

←and → keys: Moves the cursor on the parameter/monitor number to the left or right.

↑ and ↓ keys:	Increases/decreases the numeric value of
	the digit indicated with the cursor.

#050: 12

-Mon- CMNT N/P

4) Displaying comment (when a number does not exist)

#000:-----------

-Mon- DATA N/P

(CMNT)

Parameter/monitor number setting area

# 0 0 1: + H O T _ E r r E n

Data display area Comment display area

- M o n - D A T A N / P

Function key content

display area

9

9-5