Parker Hannifin G2 manual Functions, Parameters and Monitors, General Parameters

5Functions

5.1Parameters and Monitors

The group of variables expressed by #*** is called parameters and monitors. Parameters/monitors are classified according to their numbers as follows.

Parameter No.	Parameter type	Backup	Comments
0 to 199	General parameters	Stored	Always possible to read and write.
200 to 299	Mechanical setting	Stored	Reading is always possible, but writing is possible only
	parameters		when operating in mechanical setting mode.
300 to 399	Monitors	-	Read only. Reading is always possible, but writing is not
			possible at any time.

By expressing all parameters/monitors by #***, their values can be referenced (read). It is also possible to change (write) the values within the range allowed for each parameter/monitor.

5.1.1General Parameters

These parameters can be read and written at all times and an operational meaning is assigned to each. The details of each parameter will be explained separately.

Note that these parameters are stored in the driver; they will not be deleted even if the power is turned off.

5.1.2Mechanical Setting Parameters

It is always possible to read these parameters, but writing is possible only when operating in mechanical setting mode. These parameters are set only once when the device is started up. An operational meaning is assigned to each. The details of each parameter will be explained separately.

Note that these parameters are stored in the driver; they will not be deleted even if the power is turned off.

Note: If these parameters are changed during execution in mechanical setting mode, the changes made to the values will not be reflected until the power is turned on again. Therefore, please note that if you try to read a parameter value after you change the parameter, the value before the change is read until you turn the power off and on again.

5.1.3Monitors

These variables are used to display the driver's status. Only reading is allowed at all times and each has an operational meaning. The details of each parameter will be explained separately.

5-2