Parker Hannifin G2 Jog Move, DrvGII PC Utility, 22 “JogMove” dialog box 1 Editing parameters

8DrvGII PC Utility

8.5.2Jog Move

Click “Jog (J)” in the “DriveMenu” dialog box to display the “JogMove” dialog box (see Figure 8.22). If the connection with the driver is established, the current values of the related parameters are read and can be edited.

Parameter number

cellChanged value text field

Parameter content cell

Parameter value cell

Figure 8.22 “JogMove” dialog box

(1)Editing parameters

1)Click the parameter value cell of the parameter to be changed. The current value is displayed in the changed value text field.

2)Enter a value in the changed value text field and click the Enter (Return) key or click another cell to make the new parameter value valid.

3)Repeat steps 1) and 2) as necessary and click “Set (S)” to set the changed values in the driver. If there is an error in the set value, a warning message is displayed and the parameter is read again. Parameters whose setting values are erroneous will not be changed; therefore the changed parameters should be verified.

8-22