Philips M3500B manual Connecting the SpO2 Patient Cable, Disconnecting the SpO2 Patient Cable

Connecting/Disconnecting Patient Cables

Connecting the SpO2 Patient Cable

To connect the SpO2 patient cable:

1.Hold the connector with the flat side up, as shown in Figure 10-4.

2.Insert the connector into the receptacle and push until the blue portion of the connector is no longer visible.

Figure 10-4 Connecting the SpO2 Patient Cable

Disconnecting the SpO2 Patient Cable

To disconnect the SpO2 patient cable, gently pull it out of the SpO2 connector.

10

M3500B HeartStart XLT Defibrillator/Monitor 10-5