Philips M3500B manual Select Energy, 150 J, Charge

Defibrillating

Defibrillating

The defibrillation process is as follows:

1.Select Energy

The default energy setting is 150 joules. To change the energy setting, press (1(5*<6(/(&7 repeatedly to cycle through the energy level choices. Stop when the desired energy is displayed. The choices are 5, 10, 25, 50, 70, 100, 150, or 200 joules.

Figure 6-3 Energy Select Display

HR ALARM		LEAD	SpO2
		SELECT
	78	Pads

150 J	Shocks:0
	00:00:8

ENERGY CHARGE

SELECT

2.Charge

Press &+$5*( .

As the defibrillator charges, the current charge is displayed above the shock counter. A charging tone beeps until the desired energy level is reached, at which point you’ll hear a continuous charge tone.

6-4 Defibrillating in Manual Mode