Philips M3500B manual Sync

Delivering a Synchronized Shock

Figure 7-1: Charging in Sync Mode

HR ALARM		LEAD	SpO2
		SELECT
	78	Pads

	150 J			87 J
			Sync	Shocks:0					7
				00:00:8
	ENERGY		DISARM
	SELECT
	If desired, you may increase or decrease the selected energy level after
			, by pressing		repeatedly until the desired energy
	pressing			(1(5*<
		&+$5*(
				6(/(&7	charges to the modified energy level
	level is displayed. The defibrillator
	automatically. Wait until the current charge reaches the selected energy
	level before proceeding.
	5. Make sure no one is touching the patient or anything connected to the
	patient. Call out “Clear.” Then press						and continue to hold
						6+2&.		6+2&.
	down until the shock is delivered.
	The defibrillator shocks with the next detected R-wave.
WARNING	Defibrillation current can cause operator or bystander injury. Do not touch the
	patient, or equipment connected to the patient, during defibrillation.

M3500B HeartStart XLT Defibrillator/Monitor 7-3