Philips M3500B manual 180, $Gylvhg

Configuring the HeartStart XLT

NOTE

NOTE

Table 10-2 AED Settings: (Continued)

Parameter			Description		Setting
					Choices
￿16$￿￿7LPHU￿	Defines the duration of the Pause time (in sec-				30, 60, 120,
	onds) when				180
		3$86(		is pressed and the time
	since the last shock is greater than the 6KRFN￿
	6HULHV￿7LPHU setting - typically when 1R￿6KRFN￿
	$GYLVHG￿￿
If (XURSHDQ￿3URWRFRO is set to Off, the following configuration choice appears:
´3DXVHµ￿7LPHU￿	Defines the duration of the pause time (in sec-				30, 60, 120,
	onds), when			is pressed (when (XURSHDQ￿	180
			3$86(
	3URWRFRO is set to Off).

The following two configuration choices are always available regardless of the (XURSHDQ￿3URWRFRO setting.

/HDG￿6HOHFW	Turns on ECG monitoring.	On, Off
6S2￿	Turns on SpO2 monitoring. Only listed as a	On, Off
	configurable item if the SpO2 option was pur-
	chased.

*If (XURSHDQ￿3URWRFRO is set to 2II, the Pause Timer is used during the Pause state and appears as a configurable parameter. If (XURSHDQ￿3URWRFRO￿is set to 2Q, either the 3RVW￿6KRFN￿&35￿7LPHU or the ´16$µ￿7LPHU are used during the Pause state and appear as configurable parameters in place of 3DXVH￿7LPHU.

If (XURSHDQ￿3URWRFRO is set to 2Q, the setting for the 6KRFN￿6HULHV￿7LPHU must be < 3RVW￿6KRFN￿&35￿7LPHU < 16$￿7LPHU. Also, the 6KRFN￿6HULHV￿7LPHU can not be config- ured to either 2II or ￿￿￿.

10-12 Setting Up and Configuring the HeartStart XLT