Philips M3500B manual Inserting a Data Card

Using a Data Card

Inserting a Data Card

To insert a Data Card:

1.Make sure the HeartStart XLT is powered off.

2.Press up on the release latch to open the door to the Data Card compart- ment.

3.If a Data Card is already in the compartment, press the black button inside the compartment to eject the card (see Figure 2-8). Then pull the card out.

4.With the yellow label facing up and the pointing towards the Heart- Start XLT, slide the Data Card into the compartment.

5.Close the Data Card compartment door. Make sure that you hear a click, indicating that the door is latched shut.

Figure 2-8 Inserting a Data Card

Eject

2-12 Getting Started