Philips M3500B manual Battery and Battery Power Module, Charge Time

2.4" (H) x 0.94" (W) x 7.2" (D).

61.7 mm (H) x 23.9 mm(W) x 182 mm (D).

Specifications

Thermal Array Printer (cont.)

Auto Printing: The printer can be configured to automatically print on Mark,

Charge, Shock and Alarm.

Delayed Printing: The printer can be configured to run real time or with a six second delay.

Reports: The following can be printed: Event Summary, Configuration,

Extended Self Test, System Log.

Speed: 25 mm/s with an accuracy of + 5%.

Amplitude Accuracy: + 10% or + 50 uV, whichever is greater.

Paper Size: 50 mm by 30 m (100 ft).

Battery and Battery Power Module

Battery Type: 2 Ah, 12V, rechargeable, Sealed Lead Acid.

Battery Dimensions:

Weight: 1.4 lb (0.65 kg).

Charge Time:

Approximately 14.5 hours to 100%, indicated by LED on power module.

Approximately 2.5 hours to 90%, indicated by LED on power module.

Capacity: 2.7 hours ECG monitoring or 50 full-energy discharges or 2.1 hours ECG monitoring while pacing (with a new, fully charged battery and temperature above 20oC).

Battery Indicators: LOW BATTERY message appears on monitor when at least 10 minutes of monitoring time and 6 maximum-energy discharges

remain (with a new battery and temperature above 20oC).

Battery Storage: Should not be stored above 40oC for extended periods of time.

Charger Output: Unit can be operated using Class I AC power module alone with no battery installed.

13-6 Specifications & Safety