Philips M3500B manual Connecting the ECG Patient Cable, Disconnecting the ECG Patient Cable

Connecting/Disconnecting Patient Cables

Connecting the ECG Patient Cable

To connect a 3- or 5-lead ECG patient cable:

1.Align the keyed patient cable plug with the slot on the ECG connector, as shown in Figure 10-3.

2.Push the patient cable firmly into the ECG connector, until the white por- tion is no longer visible.

Figure 10-3 ECG Patient Cable Connector

Disconnecting the ECG Patient Cable

To disconnect the ECG patient cable, gently pull the white patient cable plug out of the ECG connector, as shown in Figure 10-3.

10-4 Setting Up and Configuring the HeartStart XLT