Preparation

Preparation

In preparation for defibrillation:

6

NOTE

1. Apply multifunction defib electrode pads as directed on the package. Use either the anterior-anterior or anterior-posterior electrode placement, as appropriate.

2. Connect the pads to the pads patient cable, as shown in Figure 6-2.

3. If needed, insert a Data Card (as described in “Using a Data Card” on 2- 11).

4. Press On.

5. Enter Manual Mode, if AED Mode is active.

Figure 6-2 Connecting Pads to the Patient Cable

Defibrillation is always performed through pads. However, during defibrilla- tion, you may choose to monitor ECG using an alternate ECG source (3- or 5- lead monitoring electrodes).

M3500B HeartStart XLT Defibrillator/Monitor

6-3

Page 75
Image 75
Philips M3500B manual Preparation