Philips M3500B manual Pacing Demand Mode 70ppm 30mA

Pacing

4. Adjust the rate to the desired number of paced pulses per minute (ppm).

Press up,		, or down,	, on Rate to increase or decrease the num-
ber of paced pulses per minute.
5. Press	Start	to start pacing.
	Stop

The message 3DFLQJ indicates that paced pulses are being delivered in the selected mode at the rate and output level displayed.

Figure 8-2: Pacing Display

HR ALARM

78

150 J

LEAD

SELECT

Lead II

Pacing

Demand Mode 70ppm 30mA

SpO2

8

Shocks:0

00:00:8

ENERGY CHARGE

SELECT

NOTE	Pacing will not start if there is a problem with the multifunction defib elec-
	trode pads connections or, in demand mode, a problem with the ECG monitor-
	ing electrodes connections. Should a problem exist, a system message is
	displayed. Be attentive to system messages.

M3500B HeartStart XLT Defibrillator/Monitor 8-5