System Messages
M3500B HeartStart XLT Defibrillator/Monitor 12-5
12
Momentary Messages

Momentary messages are temporary and only appear on the display for a few

seconds. Each message is accompanied by a three second beep to alert you.

Table 12-2 lists momentary messages.

Table 12-2 Momentary Messages
Message Possible Cause Corrective Action
$WWDFK3DGV The multifunction defib electrode pads
are not making proper contact with the
patient.
Check the pads are applied to the
patient, as directed on the pads’ pack-
age.
Replace the pads if the prompt contin-
ues.
$WWDFK/HDGV An attempt was made to begin pacing in
Demand Mode without ECG leads
attached to the patient.
Attach leads to patient.
'HILE'LVDUPHG The pads connection is compromised.
The mode is changed from Manual to
AED while the defibrillator is
charged.
is not pressed within 30 sec-
onds of the defibrillator being
charged.
is pressed.
Check the pads are applied to the
patient properly.
If a shock is indicated, deliver the
shock before changing modes.
To deliver a shock, press
within 30 seconds of the defibrillator
being charged.
1R6KRFN'HOLYHUHG Patient impedance is too high. Make sure the pads are applied prop-
erly.
Replace the pads, if necessary
&KHFN3ULQWHU Printer paper is absent or jammed; the
printer door is not closed properly. Reload printer paper.
Make sure the door is closed properly.
6+2&.
',6$50
6+2&.