PMC-Sierra, Inc.

S/UNI-QUAD

DATASHEET

PM5349 S/UNI-QUAD

PMC-971239

ISSUE 6

SATURN USER NETWORK INTERFACE (155-QUAD)

 

 

 

Register 0x49: TPOP Path Status

Bit

Type

Function

Default

Bit 7

R/W

FEBE[3]

0

Bit 6

R/W

FEBE[2]

0

Bit 5

R/W

FEBE[1]

0

Bit 4

R/W

FEBE[0]

0

Bit 3

R/W

PRDI

0

Bit 2

R/W

APRDI

0

Bit 1

R/W

G1[1]

0

Bit 0

R/W

G1[0]

0

This register allows control over the path status byte.

G[1:0]:

The G1[1:0] bits are inserted in bits 1 and 2 of the path status byte G1. These bits are ignored when EPRDIEN is logic zero or when EPRDIEN and EPRDISRC are both logic one. See the description of EPRDIEN and EPRDISRC for more details on how G1 can be controlled.

APRDI

The APRDI bit controls the insertion of the auxiliary path remote defect indication. When APRDI is a logic one, the APRDI bit position in the path status byte is set high. When APRDI is a logic zero, the APRDI bit position in the path status byte is set low.

PRDI:

The PRDI bit controls the insertion of the path remote defect indication. When a logic one is written to this bit position, the PRDI bit position in the path status byte is set high. When a logic zero is written to this bit position, the PRDI bit position in the path status byte is set low. This bit is ignored when EPRDIEN is logic zero or when EPRDIEN and EPRDISRC are both logic one and the PRDI bit in the G1 byte (bit 6) is set according to the setting of the Channel Auto Enhanced Path RDI Control registers (0x92 and 0x93).

FEBE[3:0]:

The FEBE[3:0] bits are inserted in the FEBE bit positions in the path status byte. The value contained in FEBE[3:0] is cleared after being inserted in the

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use

131

Page 137
Image 137
PMC-Sierra PM5349 manual Register 0x49 Tpop Path Status Bit Type Function Default