A – Command Line Interface | 0 | |
|
| |
Config Command |
|
|
|
|
|
|
|
|
Config Command
Manages the Fibre Channel configurations on a switch. For information about setting the port and switch configurations, refer to the ”Set Config Command” on page
Authority Admin session for all keywords except List
Syntax config
activate [config_name] backup
cancel
copy [config_source] [config_destination] delete [config_name]
edit [config_name] list
restore
save [config_name]
Keywords activate [config_name]
Activates the configuration given by [config_name]. If you omit [config_name], the currently active configuration is used. Only one configuration can be active at a time.
backup
Creates a file named configdata, which contains the system configuration information. To download this file, open an FTP session, log in with account name/password of “images” for both, and type “get configdata”. Refer to ”Backing up and Restoring Switch Configurations” on page
cancel
Terminates the current configuration edit session without saving changes that were made.
copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by [config_destination]. The switch supports up to 10 configurations including the default configuration.
delete [config_name]
Deletes the configuration given by [config_name] from the switch. You cannot delete the default configuration (Default Config) nor the active configuration.
edit [config_name]
Opens an edit session for the configuration given by [config_name]. If you omit [config_name], the currently active configuration is used.
list
Displays a list of all available configurations on the switch. This keyword does not require an admin session.
