A – Command Line Interface | 0 | |
|
| |
Show Command |
|
|
|
|
|
|
|
|
port [port_number]
Displays operational information for the port given by [port_number]. Ports are numbered beginning with 0. If [port number] is omitted, information is displayed for all ports. Table
| Table |
|
|
Entry | Description |
|
|
AIinit | Incremented each time the port begins AL initialization. |
AIinitError | Number of times the port entered initialization and the |
| initialization failed. |
Bad Frames | Number of frames that have framing errors. |
ClassXFramesIn | Number of class x frames received by this port. |
ClassXFramesOut | Number of class x frames sent by this port. |
ClassXWordsIn | Number of class x words received by this port. |
ClassXWordsOut | Number of class x words sent by this port. |
ClassXToss | Number of times an SOFi3 or SOFn3 frame is tossed from |
| TBUF. |
DecodeError | Number of decode errors detected |
EpConnects | Number of times an E_Port connected through ISL negotiation. |
FBusy | Number of times the switch sent a F_BSY because Class 2 |
| frame could not be delivered within ED_TOV time. Number of |
| class 2 and class 3 fabric busy (F_BSY) frames generated by |
| this port in response to incoming frames. This usually indicates |
| a busy condition on the fabric or N_Port that is preventing |
| delivery of this frame. |
Flowerrors | Received a frame when there were no available credits. |
FReject | Number of frames from devices that were rejected. |
InvalidCRC | Invalid CRC detected. |
InvalidDestAddr | Invalid destination address detected. |
LIP_AL_PD_ALPS | Number of F7, AL_PS LIPs, or AL_PD (vendor specific) resets, |
| performed. |
LIP_F7_AL_PS | This LIP is used to reinitialize the loop. An L_Port, identified by |
| AL_PS, may have noticed a performance degradation and is |
| trying to restore the loop. |
|
|
