Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 59022-11 A 4-13, SANBOX2-16 manual Ratov

Models: 59022-11 A 4-13 SANBOX2-16

1 322

Download 322 pages 943 b

Page 115

0			4 – Managing Switches
			4 – Managing Switches
			Displaying Switch Information


	Table 4-2. Switch Data Window Entries (Continued)

	Entry	Description

	Super User	Super user privileges enabled/disabled
	UserAuthentication	Enforcement of account names and authority (always
	Enabled	True)
	Vendor	Switch manufacturer
	Firmware Version	Active firmware version
	Inactive Firmware Version	This field does not apply to this switch
	Pending Firmware Version	Firmware version that will be activated at the next reset
	PROM/Flasher Version	PROM firmware version
	MAC Address	Media Access Control address
	IP Address	Internet Protocol address
	Subnet Mask	Mask that determines the IP address subnet
	Gateway	Gateway address
	SNMP Enabled	SNMP enabled or disabled.
	Negotiated Domain ID	The domain ID currently being used by the fabric
	Configured Domain ID	The domain ID defined by network administrator
	Domain ID Lock	Domain ID lock status. Prevents (True) or permits (False)
		dynamic domain ID reassignment.
	Number of Ports	Number of ports activated on the switch
	Switch Type	Switch model
	Operational State	Switch operational state: Online, Offline, Diagnostic,
		Down
	Administrative State	Current switch administrative state
	Configured Admin State	Switch administrative state that is stored in the switch
		configuration
	R_A_TOV	Resource allocation timeout value
	E_D_TOV	Error detect timeout value

59022-11 A

4-9

Image 115

Q-Logic 59022-11 A 4-13, SANBOX2-16 manual Ratov

Contents

SANbox2-8c/16 Switch Management User’s Guide Document Revision History SANbox2-8c/16 Switch Management User’s GuideTable of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Working with Device Information and Nicknames Zoning a Fabric Changing a User Account Password Section Managing SwitchesSection Managing Ports Changing the Default Performance View File Encryption Key109 Appendix a Command Line Interface103 106Glossary Index Figures Tables 131 Port Threshold Alarm Configuration DefaultsRelated Materials Intended AudienceJdom License Contact Information Technical SupportAvailability TrainingIntroduction Technical Support 59022-11 a Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements For a Linux platform SANsurfer Switch ManagerChange directory to the location of the install program For a Windows platformOpen the CD and move to the following folder SMS Installation for WindowsSANsurfer Management Suite For a Mac OS X platformChglax.bat SMS Installation for Linux SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer commandSANsurfer Switch Manager Window Exiting SANsurfer Management Suite Save Default Fabric View File DialogLoad Default Fabric File Dialog Uninstalling SANsurfer Switch ManagerInstalldirectory/UninstallData/SANsurferUninstaller SMS UninstallChanging the Encryption Key for the Default Fabric View File Standalone UninstallSaving and Opening Fabric View Files Setting SANsurfer Switch Manager PreferencesPreferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online HelpTopology Display SANsurfer Switch Manager User InterfaceFaceplate Display Topology Display Menu Menu BarMenu options in the topology display are shown in Figure Shortcut Keys Faceplate Display MenuMenu options in the faceplate display are shown in Figure Tool Bar Buttons Tool BarFabric Tree Fabric TreeGraphic Window Working Status IndicatorData Window and Tabs Switch and Link Status Using the Topology DisplaySelecting Switches and Links Working with Switches and LinksArranging Switches in the Display Topology Data Windows Opening the Faceplate Display and Topology Popup MenusPort Views and Status Using the Faceplate DisplaySelecting Ports Working with PortsOpening the Faceplate Popup Menu Faceplate Data Windows Page Radius Servers Managing FabricsAdd Server Adding a Radius ServerManaging Fabrics Remove Server Removing a Radius ServerEdit Radius Server Information Editing Radius Server InformationModify Authentication Order Radius Server Information Modifying Authentication Order Radius Server InformationConnection Security Securing a FabricFabric security consists of the following User Account Security Security Consistency ChecklistDevice Security Edit Security Dialog Edit Security DialogCreating a Security Set Create Security Group Dialog Create Security Group DialogCreating a Security Group Create a Security Group Member Dialog Create Security Group Member DialogCreating a Security Group Member Editing the Security Configuration on a Switch Viewing Properties of a Security Set, Group, or Member Using the Security Config DialogActivating a Security Set Archiving a Security Configuration to a FileDeactivating a Security Set Active Security Data Window Configured Security Data WindowFabric Services Enabling Snmp ConfigurationSaving a Version Snapshot Click the In-band Management Enable buttonEnabling In-band Management Tracking Fabric Firmware and Software VersionsExporting Version Snapshots to a File Viewing and Comparing Version SnapshotsAdding a Fabric Managing the Fabric DatabaseOpening a Fabric View File Removing a FabricSaving a Fabric View File Adding a New Switch to a FabricRediscovering a Fabric Replacing a Failed Switch Displaying Fabric Information Deleting Switches and LinksFabric Status Topology Display Switch and Status Icons11. Events Browser Displaying the Event BrowserIcon Severity Levels12. Filter Events Dialog Filtering the Event BrowserSaving the Event Browser to a File Sorting the Event BrowserDevices Data Window Entries Devices Data Window13. Active Zone Set Data Window Active Zone Set Data WindowDisplaying Detailed Device Information SANsurfer Switch Manager enables you to do the followingLink Data Window Working with Device Information and NicknamesManaging Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Soft Zones ZonesAliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following 15. Edit Zoning Dialog Editing the Zoning DatabaseEdit Zoning Dialog Tool Bar Buttons and Icons 16. Zoning Config Dialog Configuring the Zoning DatabaseSaving the Zoning Database to a File Default VisibilityInterop Auto Save Discard InactiveRestoring the Zoning Database from a File Restoring the Default Zoning DatabaseRemoving All Zoning Definitions Creating a Zone Set Managing Zone SetsCopying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone Set Removing a Zone from a Zone Set or from All Zone SetsCreating a Zone in a Zone Set Managing ZonesManaging zones involves the following Adding Zone Members Click the OK button to add the member and save the change Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from a Zone SetChanging Zone Types Removing a Zone from All Zone SetsManaging Aliases Adding a Member to an Alias Creating an AliasMerging Fabrics and Zoning Removing an Alias from All ZonesZone Merge Failure Zone Merge Failure Recovery Managing Switches Factory User Accounts Managing User AccountsCreating User Accounts User Account Administration Dialog Add AccountRemoving a User Account User Account Administration Dialog Remove AccountUser Account Administration Dialog- Change Password Changing a User Account PasswordModifying a User Account User Account Administration Dialog Modify AccountFaceplate Display Displaying Switch InformationSwitch Data Window Entries Switch Data WindowRatov Switch Data Window Entries Displaying Detailed Device Information on page 3-34for Port Statistics Data Window Faceplate Display Port Information Port Information Data WindowConfigured Zonesets Data Window Configured and Active Zonesets Data WindowPort Threshold Alarm Configuration Dialog Configuring Port Threshold AlarmsSample Window Paging a SwitchEvent CountResetting a Switch Setting the Date/Time and Enabling NTP ClientType Description Switch ResetsUsing the Configuration Wizard Configuring a Switch10. Switch Properties Dialog Switch PropertiesSwitch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock Fabric Device Management Interface In-band Management Broadcast SupportInterop Mode for Zoning Advanced Switch PropertiesTimeout Values Timeout ValuesLegacy Port Address Format 12. System Services Dialog System Services DialogSecurity Consistency Checklist Dialog 13. Network Properties Dialog Network PropertiesIP Configuration Parameters IP ConfigurationNTP Client Remote Logging14. Snmp Properties Dialog Snmp PropertiesSnmp Configuration Parameters Snmp ConfigurationSnmp Trap Configuration Parameters Snmp Trap ConfigurationArchiving a Switch 15. Restore Dialogs Full and Selective Restoring a SwitchManaging Switches Factory Default Configuration Settings Restoring the Factory Default ConfigurationDownloading a Support File Installing Firmware 16. Hardware Status LEDs Displaying Hardware StatusManaging Switches Displaying Hardware Status 59022-11 a Displaying Port Information Managing PortsDisplaying Port Types Monitoring Port StatusPort Types Port Speeds Displaying Port Operational StatesDisplaying Port Speeds Port Operational StatesTransceiver Media View Displaying Transceiver Media StatusPort Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring PortsPort Administrative States Changing Port Administrative StatesChanging Port Speeds Stream Guard Changing Port TypesUsing the Extended Credits Wizard Changing Port Symbolic NameDevice Scan Designate Donor Ports Testing Ports Resetting a PortTesting Ports Fabric View Graphs Graphing Port PerformanceStarting SANsurfer Performance Viewer This section describes how to do the followingExiting SANsurfer Performance Viewer Save Default Performance View File DialogDisplayed Saving and Opening Performance View FilesSetting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption KeyDisplaying Graphs Setting the Polling FrequencyCustomizing Graphs Arranging Graphs in the DisplayManaging Ports Saving Graph Statistics to a File Setting Global Graph TypeRescaling a Selected Graph Printing GraphsLogging On to a Switch Command Line InterfaceUser Accounts Working with Switch ConfigurationsModifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Table A-1. Command-Line Completion CommandsAdmin Session Commands Table A-2. Commands Listed by Authority LevelKeywords Admin CommandAuthority SyntaxSyntax alias Alias CommandRemove alias memberlist Members aliasRename aliasold aliasnew CIM Command Table A-3. CIM Listener Configuration Parameters CIMListener CommandEnter Following is an example of the CIMListener Create commandTable A-4. CIM Subscription Configuration Parameters CIMSubscription CommandMust be Saved with the cim save command Edit configname Config CommandSyntax config Keywords activate confignameSave configname RestoreManager Archive function are not compatible with the Config Restore command# ftp symbolicname or ipaddress Support Create CommandCreate CertificateCommand Line Interface Create Command Following is an example of the Create Certificate command Syntax date Date CommandKeywords MMDDhhmmCCYY Authority Admin Firmware Install CommandSyntax firmware install Syntax group Group CommandTable A-5. ISL Group Member Attributes Keywords add groupTable A-6. Port Group Member Attributes Create group type Copy groupsource groupdestinationTable A-8. Group Member Attributes Edit group memberSecuritysets group Members groupRemove group memberlist Rename groupold groupnewISL Following is an example of the Group Edit commandFollowing is an example of the Group Members command Following is an example of the Group List commandSyntax Hardreset CommandAuthority None Help CommandKeywords command Syntax help command keywordAuthority None Syntax history History CommandHotreset Hotreset CommandImage Command Are running the same version of firmware FTP. Enter one of the following on the command lineSwitch name associated with the IP address Enter the following account name and passwordWait for the unpack to complete Open an Admin session to acquire the necessary authorityLip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop portSyntax passwd accountname Keywords accountname Passwd CommandSyntax ping ipaddress Keywords ipaddress Ping CommandDisplays current system process information Ps CommandFollowing is an example of the Ps command Syntax ExamplesCloses the Telnet session Quit CommandSyntax quit, exit, or logout Config configname Reset CommandSystem ServicesSwitch SnmpValues Table A-9. Switch Configuration DefaultsArbff Table A-10. Port Configuration DefaultsTable A-12. Zoning Configuration Defaults Table A-11. Port Threshold Alarm Configuration DefaultsTable A-13. Snmp Configuration Defaults Table A-15. Services Configuration Defaults Table A-14. Radius Configuration DefaultsTable A-17. Security Configuration Defaults Table A-16. System Configuration DefaultsKeywords active Security CommandHistory Following is an example of the Security Active commandFollowing is an example of the Security Limits command Following is an example of the Security History commandFollowing is an example of the Security List command Securityset Command Rename securitysetold securitysetnew Delete securitysetGroups securityset Remove securityset groupSyntax set Set CommandPort option Setup optionSwitch state Pagebreak statePort portnumber Set Config CommandSet config Table A-18. Set Config Port ParametersTable A-18. Set Config Port Parameters Security Table A-20. Set Config Switch Parameters Table A-19. Security Configuration ParametersRatov Threshold Table A-21. Set Config Threshold ParametersTable A-22. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Security commandFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Component filterlist Set Log CommandSet log ArchiveDisplay filter SnmpStop Level filterPort portlist StartAlarms are always logged and always displayed on the screen Bypass alpa Set Port CommandEnable Keywords portnumberState state Configuration fields Set Setup CommandSet setup Radius Services Snmp SystemTable A-23. Radius Service Settings Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration SettingsTable A-26. System Configuration Settings Following is an example of the Set Setup Services command Following is an example of the Set Setup Snmp command SANbox2 admin # set setup system Following is an example of the Set Setup System commandKeywords about Show CommandFdmi portwwn Alarm optionCimlistener listenername Cimsubscription subscriptionnamePagebreak Log optionLsdb Ns optionTbuf Table A-27. Show Port ParametersLIPF8ALPS Steering domainid Post log„ Zoning History, Limits, List Table A-28. Switch Operational ParametersWhoami Zoneset Active, ListUsers Displays the current time zone settingTopology Displays all connected devicesFollowing is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi commandFollowing is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Collisions0 txqueuelen100 Following is an example of the Show Interface commandPL-XPL-VC-SG3-22 Following is an example of the Show Port commandFollowing is an example of the Show Topology command Following is an example of the Show Switch command59022-11 a 101 Following is an example of the Show Version command Show config Show Config CommandFollowing is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Following is an example of the Show Config Threshold commandKeywords numberofevents Show Log CommandNone Show logPort SettingsLevel OptionsFollowing is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Radius command Following is an example of the Show Setup Services commandFollowing is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Status Test CommandTest Port portnumber testtypeAdmin start Test port x online Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime Add User CommandUser AccountsFollowing is an example of the User Edit command Following is an example of the User Add commandFollowing is an example of the User List command Following is an example of the User Delete commandFollowing is an example of the Whoami command Whoami CommandWhoami Syntax zone Zone CommandType zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandRename zonesetold zonesetnew Remove zoneset zonelistZones zoneset Opens a Zoning Edit session Zoning CommandLimit Description Table A-29. Zoning Database LimitsE1JBOD1 E2JBOD2 Following is an example of the Zoning Limits commandFollowing is an example of the Zoning List command Command Line Interface Zoning Command 134 59022-11 a BootP Access Control List ZoneAdministrative State AlarmFabric Management Switch Class 3 ServiceConfigured Zone Sets Default VisibilityMaintenance Mode Input Power LEDInter-Switch Link Maintenance ButtonSmall Form-Factor Pluggable Power On Self Test PostPrincipal Switch SANsurfer Switch ManagerIndex Index-2 59022-11 a 59022-11 a Index-3 Index-4 59022-11 a 59022-11 a Index-5 Index-6 59022-11 a 59022-11 a Index-7 Index-8 59022-11 a 59022-11 a Index-9 Index-10 59022-11 a