0

A – Command Line Interface

 

 

Group Command

 

 

 

 

Keywords add [group]

Initiates an editing session in which to specify a group member and its attributes for the existing group given by [group]. ISL, Port, and MS member attributes are described in Table A-5, Table A-6, and Table A-7respectively. The group name and group type attributes are read-only fields common to all three tables.

 

Table A-5. ISL Group Member Attributes

 

 

 

Attribute

 

Description

 

 

Member

Worldwide name of the switch that would attach to the switch. A

 

member cannot belong to more than one group.

Authentication

Enables (CHAP) or disables (None) authentication using the

 

Challenge Handshake Authentication Protocol (CHAP). The default

 

is None.

Primary Hash

The preferred hash function to use to decipher the encrypted

 

Primary Secret sent by the ISL member. The hash functions are

 

MD5 or SHA-1. If the ISL member does not support the Primary

 

Hash, the switch will use the Secondary Hash.

Primary Secret

Hexadecimal string that is encrypted by the Primary Hash for

 

authentication with the ISL group member. The string has the

 

following lengths depending on the Primary Hash function:

 

„

MD5 hash: 16-byte

 

„

SHA-1 hash: 20-byte

Secondary Hash

Hash function to use to decipher the encrypted Secondary Secret

 

sent by the ISL group member. Hash values are MD5 or SHA-1. The

 

Secondary Hash is used when the Primary Hash is not available on

 

the ISL group member. The Primary Hash and the Secondary Hash

 

cannot be the same.

Secondary

Hex string that is encrypted by the Secondary Hash and sent for

Secret

authentication. The string has the following lengths depending on

 

the Secondary Hash function:

 

„

MD5 hash: 16-byte

 

„

SHA-1 hash: 20-byte

Binding

Domain ID of the switch to which to bind the ISL group member

 

worldwide name. This option is available only if

 

FabricBindingEnabled is set to True using the Set Config Security

 

command. Refer to the ”Set Config Command” on page A-60.

 

0 (zero) specifies no binding.

 

 

 

59022-11 A

A-25

Page 199
Image 199
Q-Logic 59022-11 A 4-13, SANBOX2-16 manual Keywords add group, Table A-5. ISL Group Member Attributes