Services | Q-Logic 59022-11 A 4-13, SANBOX2-16 specs

0	A – Command Line Interface
	A – Command Line Interface
	Set Setup Command

services

Prompts you in a line-by-line fashion to enable or disable switch services.

Table A-24describes the switch service parameters. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

Note:	Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is
	possible to disable all Ethernet access to the switch.
		Table A-24. Switch Services Settings

	Entry		Description

TelnetEnabled			Enables (True) or disables (False) the ability to manage
			the switch over a Telnet connection. Disabling this service
			is not recommended. The default is True.
SSHEnabled			Enables (True) or disables (False) Secure Shell (SSH)
			connections to the switch. SSH secures the remote
			connection to the switch. To establish a secure remote
			connection, your workstation must use an SSH client. The
			default is False.
GUIMgmtEnabled			Enables (True) or disables (False) out-of-band
			management of the switch with SANsurfer Switch
			Manager, the SANsurfer Switch Manager Application
			Application Programming Interface, SNMP, and CIM. If this
			service is disabled, the switch can only be managed
			inband or through the serial port. The default is True.
SSLMgmtEnabled			Enables (True) or disables (False) secure SSL connections
			for management applications including SANsurfer Switch
			Manager, the SANsurfer Switch Manager web applet,
			SANsurfer Switch Manager Application Programming
			Interface, and the CIM server. The default is False.
			To enable secure SSL connections, you must first
			synchronize the date and time on the switch and
			workstation.
			This service must be enabled to authenticate users
			through a RADIUS server.
			Enabling SSL automatically creates a security
			certificate on the switch.
			To disable SSL when using a user authentication
			RADIUS server, the RADIUS server authentication
			order must be local.

59022-11 A

A-79

Image 253

Q-Logic 59022-11 A 4-13, SANBOX2-16 manual Table A-24. Switch Services Settings

Contents

SANbox2-8c/16 Switch Management User’s Guide Document Revision History SANbox2-8c/16 Switch Management User’s Guide Table of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Working with Device Information and Nicknames Zoning a Fabric Changing a User Account Password Section Managing Switches Section Managing Ports Changing the Default Performance View File Encryption Key 103 Appendix a Command Line Interface106 109 Glossary Index Figures Tables 131 Port Threshold Alarm Configuration Defaults Related Materials Intended Audience Jdom License Availability Technical SupportTraining Contact Information Introduction Technical Support 59022-11 a Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements Change directory to the location of the install program SANsurfer Switch ManagerFor a Windows platform For a Linux platform SANsurfer Management Suite SMS Installation for WindowsFor a Mac OS X platform Open the CD and move to the following folder Chglax.bat SMS Installation for Linux SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer command SANsurfer Switch Manager Window Exiting SANsurfer Management Suite Save Default Fabric View File Dialog Load Default Fabric File Dialog Uninstalling SANsurfer Switch Manager Installdirectory/UninstallData/SANsurferUninstaller SMS Uninstall Changing the Encryption Key for the Default Fabric View File Standalone Uninstall Saving and Opening Fabric View Files Setting SANsurfer Switch Manager Preferences Preferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online Help Topology Display SANsurfer Switch Manager User InterfaceFaceplate Display Topology Display Menu Menu BarMenu options in the topology display are shown in Figure Shortcut Keys Faceplate Display MenuMenu options in the faceplate display are shown in Figure Tool Bar Buttons Tool Bar Fabric Tree Fabric Tree Graphic Window Working Status IndicatorData Window and Tabs Switch and Link Status Using the Topology Display Selecting Switches and Links Working with Switches and LinksArranging Switches in the Display Topology Data Windows Opening the Faceplate Display and Topology Popup Menus Port Views and Status Using the Faceplate Display Selecting Ports Working with Ports Opening the Faceplate Popup Menu Faceplate Data Windows Page Radius Servers Managing Fabrics Add Server Adding a Radius Server Managing Fabrics Remove Server Removing a Radius Server Edit Radius Server Information Editing Radius Server Information Modify Authentication Order Radius Server Information Modifying Authentication Order Radius Server Information Connection Security Securing a FabricFabric security consists of the following User Account Security Security Consistency Checklist Device Security Edit Security Dialog Edit Security Dialog Creating a Security Set Create Security Group Dialog Create Security Group Dialog Creating a Security Group Create a Security Group Member Dialog Create Security Group Member Dialog Creating a Security Group Member Editing the Security Configuration on a Switch Viewing Properties of a Security Set, Group, or Member Using the Security Config Dialog Activating a Security Set Archiving a Security Configuration to a FileDeactivating a Security Set Fabric Services Configured Security Data WindowEnabling Snmp Configuration Active Security Data Window Enabling In-band Management Click the In-band Management Enable buttonTracking Fabric Firmware and Software Versions Saving a Version Snapshot Exporting Version Snapshots to a File Viewing and Comparing Version Snapshots Adding a Fabric Managing the Fabric Database Opening a Fabric View File Removing a Fabric Saving a Fabric View File Adding a New Switch to a FabricRediscovering a Fabric Replacing a Failed Switch Displaying Fabric Information Deleting Switches and Links Fabric Status Topology Display Switch and Status Icons 11. Events Browser Displaying the Event Browser Icon Severity Levels 12. Filter Events Dialog Filtering the Event Browser Saving the Event Browser to a File Sorting the Event Browser Devices Data Window Entries Devices Data Window 13. Active Zone Set Data Window Active Zone Set Data Window Link Data Window SANsurfer Switch Manager enables you to do the followingWorking with Device Information and Nicknames Displaying Detailed Device Information Managing Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Soft Zones Zones Aliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following 15. Edit Zoning Dialog Editing the Zoning Database Edit Zoning Dialog Tool Bar Buttons and Icons 16. Zoning Config Dialog Configuring the Zoning Database Interop Auto Save Default VisibilityDiscard Inactive Saving the Zoning Database to a File Restoring the Zoning Database from a File Restoring the Default Zoning DatabaseRemoving All Zoning Definitions Creating a Zone Set Managing Zone Sets Copying a Zone to a Zone Set Activating and Deactivating a Zone Set Removing a Zone Set Removing a Zone from a Zone Set or from All Zone Sets Creating a Zone in a Zone Set Managing ZonesManaging zones involves the following Adding Zone Members Removing a Zone Member Renaming a Zone or a Zone SetRemoving a Zone from a Zone Set Click the OK button to add the member and save the change Changing Zone Types Removing a Zone from All Zone SetsManaging Aliases Adding a Member to an Alias Creating an Alias Merging Fabrics and Zoning Removing an Alias from All ZonesZone Merge Failure Zone Merge Failure Recovery Managing Switches Factory User Accounts Managing User Accounts Creating User Accounts User Account Administration Dialog Add Account Removing a User Account User Account Administration Dialog Remove Account User Account Administration Dialog- Change Password Changing a User Account Password Modifying a User Account User Account Administration Dialog Modify Account Faceplate Display Displaying Switch Information Switch Data Window Entries Switch Data Window Ratov Switch Data Window Entries Displaying Detailed Device Information on page 3-34for Port Statistics Data Window Faceplate Display Port Information Port Information Data Window Configured Zonesets Data Window Configured and Active Zonesets Data Window Port Threshold Alarm Configuration Dialog Configuring Port Threshold Alarms Event Paging a SwitchCount Sample Window Resetting a Switch Setting the Date/Time and Enabling NTP Client Type Description Switch Resets Using the Configuration Wizard Configuring a Switch 10. Switch Properties Dialog Switch Properties Switch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock Fabric Device Management Interface In-band Management Broadcast Support Interop Mode for Zoning Advanced Switch Properties Timeout Values Timeout ValuesLegacy Port Address Format 12. System Services Dialog System Services Dialog Security Consistency Checklist Dialog 13. Network Properties Dialog Network Properties IP Configuration Parameters IP Configuration NTP Client Remote Logging 14. Snmp Properties Dialog Snmp Properties Snmp Configuration Parameters Snmp Configuration Snmp Trap Configuration Parameters Snmp Trap Configuration Archiving a Switch 15. Restore Dialogs Full and Selective Restoring a Switch Managing Switches Factory Default Configuration Settings Restoring the Factory Default Configuration Downloading a Support File Installing Firmware 16. Hardware Status LEDs Displaying Hardware Status Managing Switches Displaying Hardware Status 59022-11 a Displaying Port Information Managing Ports Displaying Port Types Monitoring Port StatusPort Types Displaying Port Speeds Displaying Port Operational StatesPort Operational States Port Speeds Transceiver Media View Displaying Transceiver Media Status Port Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring Ports Port Administrative States Changing Port Administrative States Changing Port Speeds Stream Guard Changing Port Types Using the Extended Credits Wizard Changing Port Symbolic NameDevice Scan Designate Donor Ports Testing Ports Resetting a Port Testing Ports Fabric View Graphs Graphing Port Performance Starting SANsurfer Performance Viewer This section describes how to do the following Exiting SANsurfer Performance Viewer Save Default Performance View File Dialog Displayed Saving and Opening Performance View Files Setting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption Key Displaying Graphs Setting the Polling Frequency Customizing Graphs Arranging Graphs in the Display Managing Ports Rescaling a Selected Graph Setting Global Graph TypePrinting Graphs Saving Graph Statistics to a File Logging On to a Switch Command Line Interface User Accounts Working with Switch Configurations Modifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Table A-1. Command-Line Completion Commands Admin Session Commands Table A-2. Commands Listed by Authority Level Authority Admin CommandSyntax Keywords Syntax alias Alias Command Remove alias memberlist Members aliasRename aliasold aliasnew CIM Command Table A-3. CIM Listener Configuration Parameters CIMListener Command Enter Following is an example of the CIMListener Create command Table A-4. CIM Subscription Configuration Parameters CIMSubscription Command Must be Saved with the cim save command Syntax config Config CommandKeywords activate configname Edit configname Manager Archive function are not compatible with the Config RestoreRestore command Save configname # ftp symbolicname or ipaddress Create Create CommandCertificate Support Command Line Interface Create Command Following is an example of the Create Certificate command Syntax date Date CommandKeywords MMDDhhmmCCYY Authority Admin Firmware Install CommandSyntax firmware install Syntax group Group Command Table A-5. ISL Group Member Attributes Keywords add group Table A-6. Port Group Member Attributes Create group type Copy groupsource groupdestination Table A-8. Group Member Attributes Edit group member Remove group memberlist Members groupRename groupold groupnew Securitysets group ISL Following is an example of the Group Edit command Following is an example of the Group Members command Following is an example of the Group List command Syntax Hardreset Command Keywords command Help CommandSyntax help command keyword Authority None Authority None Syntax history History Command Hotreset Hotreset Command Image Command Switch name associated with the IP address FTP. Enter one of the following on the command lineEnter the following account name and password Are running the same version of firmware Wait for the unpack to complete Open an Admin session to acquire the necessary authority Following is an example of the Lip command Lip CommandReinitializes the specified loop port Lip portnumber Syntax passwd accountname Keywords accountname Passwd Command Syntax ping ipaddress Keywords ipaddress Ping Command Following is an example of the Ps command Ps CommandSyntax Examples Displays current system process information Closes the Telnet session Quit CommandSyntax quit, exit, or logout Config configname Reset Command Switch ServicesSnmp System Values Table A-9. Switch Configuration Defaults Arbff Table A-10. Port Configuration Defaults Table A-12. Zoning Configuration Defaults Table A-11. Port Threshold Alarm Configuration Defaults Table A-13. Snmp Configuration Defaults Table A-15. Services Configuration Defaults Table A-14. Radius Configuration Defaults Table A-17. Security Configuration Defaults Table A-16. System Configuration Defaults Keywords active Security Command History Following is an example of the Security Active command Following is an example of the Security Limits command Following is an example of the Security History command Following is an example of the Security List command Securityset Command Groups securityset Delete securitysetRemove securityset group Rename securitysetold securitysetnew Syntax set Set Command Switch state Setup optionPagebreak state Port option Set config Set Config CommandTable A-18. Set Config Port Parameters Port portnumber Table A-18. Set Config Port Parameters Security Table A-20. Set Config Switch Parameters Table A-19. Security Configuration Parameters Ratov Threshold Table A-21. Set Config Threshold Parameters Table A-22. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Security command Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Set log Set Log CommandArchive Component filterlist Display filter Snmp Port portlist Level filterStart Stop Alarms are always logged and always displayed on the screen Enable Set Port CommandKeywords portnumber Bypass alpa State state Set setup Set Setup CommandRadius Services Snmp System Configuration fields Table A-23. Radius Service Settings Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration Settings Table A-26. System Configuration Settings Following is an example of the Set Setup Services command Following is an example of the Set Setup Snmp command SANbox2 admin # set setup system Following is an example of the Set Setup System command Keywords about Show Command Cimlistener listenername Alarm optionCimsubscription subscriptionname Fdmi portwwn Lsdb Log optionNs option Pagebreak Tbuf Table A-27. Show Port Parameters LIPF8ALPS Steering domainid Post log Whoami Table A-28. Switch Operational ParametersZoneset Active, List „ Zoning History, Limits, List Topology Displays the current time zone settingDisplays all connected devices Users Following is an example of the Show Fabric command Following is an example of the Show Domains command Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi command Following is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Collisions0 txqueuelen100 Following is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command 59022-11 a 101 Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Following is an example of the Show Config Threshold command None Show Log CommandShow log Keywords numberofevents Level SettingsOptions Port Following is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Radius command Following is an example of the Show Setup Services command Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Test Test CommandPort portnumber testtype Status Admin start Test port x online Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User User CommandAccounts Add Following is an example of the User Edit command Following is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Following is an example of the Whoami command Whoami CommandWhoami Syntax zone Zone Command Remove zone memberlist Members zoneRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Rename zonesetold zonesetnew Remove zoneset zonelistZones zoneset Opens a Zoning Edit session Zoning Command Limit Description Table A-29. Zoning Database Limits E1JBOD1 E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command Command Line Interface Zoning Command 134 59022-11 a Administrative State Access Control List ZoneAlarm BootP Configured Zone Sets Class 3 ServiceDefault Visibility Fabric Management Switch Inter-Switch Link Input Power LEDMaintenance Button Maintenance Mode Principal Switch Power On Self Test PostSANsurfer Switch Manager Small Form-Factor Pluggable Index Index-2 59022-11 a 59022-11 a Index-3 Index-4 59022-11 a 59022-11 a Index-5 Index-6 59022-11 a 59022-11 a Index-7 Index-8 59022-11 a 59022-11 a Index-9 Index-10 59022-11 a