Q-Logic SANBOX2-16 Create Security Group Member Dialog, Create a Security Group Member Dialog

3 – Managing Fabrics	0
Securing a Fabric

3.2.4.5

Create Security Group Member Dialog

Use the Create Security Group Member dialog, shown in Figure 3-7, to add a member to a security group. Choose options from the Group Member (or manually type in a hex value) and Authentication pull-down menus, and enter values in the Secret and Binding (ISL groups only) fields.

Figure 3-7. Create a Security Group Member Dialog

The conventions for ISL security group members are listed below:

„You can enter member world-wide name (WWN), which must be 16 hex characters, or 23 characters with valid WWN format xx:xx:xx:xx:xx:xx:xx:xx.

„The authentication choices are None and Chap.

„The Secret field is disabled if authentication is set to None. If authentication is Chap, the Secret field is enabled.

„The Generate button is only enabled when authentication is set to Chap.

„Valid binding entries are between 0 to 239.

The conventions for Port security group members are listed below:

„You can enter member world-wide name (WWN), which must be 16 hex characters, or 23 characters with valid WWN format xx:xx:xx:xx:xx:xx:xx:xx.

„The authentication choices are None and Chap.

„The Secret field is disabled if authentication is set to None. If authentication is Chap, the Secret field is enabled.

„The Generate button is only enabled when authentication is set to Chap.

3-14 59022-11 A