Q-Logic SANBOX2-16 CIMSubscription Command, Table A-4. CIM Subscription Configuration Parameters

A – Command Line Interface	0
CIMSubscription Command

CIMSubscription Command

Creates, edits, or removes CIM subscriptions.

Authority Admin session and a CIM Edit session. Refer to the ”CIM Command” on page A-11for information about opening a CIM edit session.

Syntax cimsubscription

create [subscription_name] delete [subscription_name] edit [subscription_name]

Keywords create [subscription_name]

Prompts you in a line-by-line fashion to create a CIM subscription with the name given by [subscription_name]. [subscription_name] can have up to 32 characters: 0-9, A-Z, a-z, _, $, ^, and -. Table A-4describes the CIM subscription configuration parameters.

Table A-4. CIM Subscription Configuration Parameters

Parameter	Description
Name	Subscription name.
FilterID	Event type for which the switch monitors and sends an indication to
	the CIM client. The event types are as follows:
	„ CreateComputerSystem – A switch is added to the fabric. This
	is the default.
	„ ModifyComputerSystem – A switch state change.
	„ DeleteComputerSystem – A switch is removed from the fabric.
	„ CreateFCPort – Not supported.
	„ ModifyFCPort – A Fibre Channel port state change.
	„ DeleteFCPort – Not supported.
EnabledState	Enable (True) or disable (False) the subscription. The default is
	True.
Duration	Subscription life span in seconds. The subscription life span begins
	when the subscription is created. Expired subscriptions do not send
	indications to the CIM client though they remain in the CIM
	database. Values can be 1–720000. 0 indicates indefinite, which is
	the default.

delete [subscription_name]

Deletes the subscription given by [subscription_name] from the CIM database.

edit [subscription_name]

Opens an editing session in which you can modify the CIM subscription given by [subscription_name]. Refer to Table A-4for a description of the CIM subscription configuration parameters.

A-14 59022-11 A