Q-Logic 59022-11 A 4-13, SANBOX2-16 manual Managing Zone Sets, Creating a Zone Set

0	3 – Managing Fabrics
	Zoning a Fabric

3.7.4

Managing Zone Sets

Zoning a fabric involves creating a zone set, creating zones as zone set members, then adding devices as zone members. The zoning database supports multiple zone sets to serve the different security and access needs of your storage area network, but only one zone set can be active at one time. Managing zone sets consists of the following tasks:

„Creating a Zone Set

„Activating and Deactivating a Zone Set

„Copying a Zone to a Zone Set

„Removing a Zone from a Zone Set or from All Zone Sets

„Removing a Zone Set

Note: Changes that you make to the zoning database are limited to the managed switch and do not propagate to the rest of the fabric. To distribute changes to configured zone sets fabric wide, you must edit the zoning databases on the individual switches.

3.7.4.1

Creating a Zone Set

To create a zone set, do the following:

1.Open the Zoning menu, and select Edit Zoning to open the Edit Zoning dialog.

2.Open the Edit menu, and select Create Zone Set to open the Create Zone Set dialog.

3.Enter a name for the zone set, and click the OK button. The new zone set name is displayed in the Zone Sets dialog. A zone set name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, -, ^, and $.

59022-11 A 3-47